База знаний
Углепластиковые трубы
Инженерный гид по углепластиковым трубам: пултрузия, намотка, размеры, жёсткость и вес.
Статей: 14
Трубы — самая распространённая конструктивная форма углепластика, и метод изготовления определяет почти всё: пултрузия даёт максимальную осевую жёсткость на единицу стоимости, намотка — прочность в окружном и крутильном направлениях. Здесь разобрано, как выбрать и как задать спецификацию.
Pultruded Continuous Spars for Automated Blades: Design-for-Manufacturing and Detachable Modular Joints
Blade architecture has been remarkably stable for two decades. A blade is a laminated shell, a spar cap that carries the bending load, and a web or shear web system that keeps the cap in position; the spar cap is almost always built at the blade factory, either by stacking pultruded pla
5 сент. 2026 г.ЧитатьPultruded Carbon Spar Caps: Production Quality Control for Wind Blade Series
Wind turbine blades have grown to lengths that were unthinkable two decades ago, and that growth has pushed blade designers toward stiffer, lighter structural members. The spar cap — the long beam that runs from root to tip along each side of the blade and carries the majority of bendin
26 авг. 2026 г.ЧитатьIndia Carbon Fiber Wind Supply: Kineco Exel Pultruded Planks and the PLI Program
India is joining the global wind-grade carbon fiber supply chain from a position most observers did not anticipate: not as a raw fiber importer or a blade maker's secondary source, but as a supplier of pultruded carbon planks to one of the world's largest wind turbine manufacturers. Kin
23 авг. 2026 г.ЧитатьCarbon Fiber Filament Winding Tension Control: Geodesic Paths, Fiber Tension and Type IV Vessel Burst Performance
Filament winding is the dominant manufacturing process for Type IV hydrogen pressure vessels, the composite overwrapped tanks used in fuel cell vehicles, hydrogen refueling stations and transport trailers. Demand is expanding rapidly: the global Type IV hydrogen vessel market was valued
18 авг. 2026 г.ЧитатьCarbon Fiber Bicycle Frame Manufacturing: Bladder Molding vs Filament Winding for Premium Frames
Sports and leisure applications account for roughly 28% of carbon fiber demand in China, and the bicycle frame is the single largest product within that segment. Yet the frames that roll out of premium brands are made by very different processes under the surface. The two dominant route
15 авг. 2026 г.ЧитатьHigh-Volume Filament Winding for Type IV Cylinders: Automation, Cycle Time, and 20,000-Unit Capacity Planning
Type IV cylinders — fully composite pressure vessels with a polymer liner and a carbon fiber overwrap — are the storage technology of choice for hydrogen fuel-cell trucks, buses, and station cascades. Their defining advantage is weight: a Type IV vessel can be 40 to 70 percent lighter t
11 авг. 2026 г.ЧитатьCarbon Fiber Frames for Solar Panels: Pultruded Profile Stiffness, Corrosion Resistance, and Lightweight Racking
Solar panel frames have been aluminum for as long as modules have been mass produced. Extruded 6063 alloy rails are cheap, proven, and recyclable, and they do the job on millions of panels worldwide. But the job is changing. Modules are getting larger — 2.5 m by 1.3 m panels are now sta
8 авг. 2026 г.ЧитатьCarbon Fiber Towpreg and Slit Tape: Cost-Effective Precursors for AFP, Filament Winding, and Braiding
Automated composite manufacturing — automated fiber placement (AFP), filament winding, and braiding — runs on a narrow family of precursor materials. For decades the default was standard unidirectional prepreg slit into tape, or dry tow used with a separate resin injection step. Carbon
4 авг. 2026 г.ЧитатьWind Turbine Spar Cap Manufacturing: Pultruded Carbon Fiber Planks vs Vacuum Infusion for Megawatt Blades
As wind turbine blades extend beyond 100 meters for offshore 15 MW+ platforms, spar cap design and manufacturing have become the critical bottleneck in blade production. The spar cap — the primary load-bearing structure running along the blade's length — must withstand extreme tensile and.
28 июл. 2026 г.ЧитатьFilament Winding Standards for Carbon Fiber Pressure Vessels: ISO, ASME, and DOT Compliance Guide
A comprehensive technical guide to international standards governing filament-wound carbon fiber pressure vessels — covering ISO 11119, ASME Section X, and DOT/CFR Title 49 requirements. Understand the certification pathways, design validation protocols, and quality assurance requirements for Type 3 and Type 4 composite pressure vessels across transportation, energy storage, and industrial gas applications.
16 июл. 2026 г.ЧитатьRoll-Wrapped vs Pultruded Carbon Fiber Tubes: When to Choose Each Manufacturing Process
A technical comparison of roll-wrapped and pultruded carbon fiber tube manufacturing — covering mechanical properties, dimensional tolerances, production economics, and application-specific selection criteria for B2B buyers.
13 июл. 2026 г.ЧитатьRoll-Wrapped Carbon Fiber Tube Manufacturing: Process Control for Consistent Quality
Roll-wrapped carbon fiber tube manufacturing is a critical production method for high-performance tubular components used across aerospace, sporting goods, industrial automation, a
4 июл. 2026 г.ЧитатьCarbon Fiber Filament Winding: Process Parameters for Pressure Vessel Manufacturing
A technical deep-dive into carbon fiber filament winding process parameters for Type III and Type IV pressure vessels — winding patterns, tension control, cure optimization, and quality metrics.
30 июн. 2026 г.ЧитатьCarbon Fiber Tubes vs Metal: A Technical Performance and Cost Comparison
Technical comparison of carbon fiber tubes and metal tubes (aluminum, steel, titanium) covering density, strength, modulus, CTE, fatigue life, and cost for engineers selecting structural tubing.
23 июн. 2026 г.Читать