База знаний
Углеродный жгут и филамент
Выбор углеродного жгута: размеры от 3K до 50K, марки T700/T800/T1000/M40, число филаментов, аппрет и влияние на последующие свойства.
Статей: 27
Углеродное волокно начинается со жгута филаментов, и почти все последующие свойства закладываются до укладки: число филаментов определяет способность к размотке, аппрет — совместимость со смолой, марка — прочность и модуль. В разделе собраны материалы о размерах жгута, прекурсоре и формовании, а также о том, как выбор сырья отражается на намотке, ткачестве и пултрузии.
Bio-Based Carbon Fiber Precursors: Lignin and Polyethylene for Low-Cost Production
The carbon fiber industry faces a fundamental paradox: the material offers unmatched specific strength and stiffness, yet its adoption in automotive, construction, and industrial applications remains limited by production costs that typically range from $15-25 per kilogram for standard modulus fiber
20 сент. 2026 г.ЧитатьLarge-Tow Carbon Fiber Cost Analysis: 48K vs 60K Price-Performance Comparison
Large-tow carbon fiber — defined as carbon fiber with more than 24,000 filaments per tow (24K) — has emerged as the cost-competitive alternative to standard tow sizes for applications where mechanical performance requirements are moderate but volume demands are high. The 48K and 60K tow sizes repres
20 сент. 2026 г.ЧитатьPAN Precursor Market 2026: Acrylonitrile Supply and Carbon Fiber Cost Structure
The carbon fiber industry's cost structure is dominated by a single upstream input: polyacrylonitrile (PAN) precursor fiber. PAN precursor typically represents 50-65% of total carbon fiber production cost, and its quality directly determines the mechanical properties of the finished car
18 сент. 2026 г.ЧитатьLarge-Tow Carbon Fiber Wet Spinning: Process Optimization for 48K/60K Production Efficiency
Large-tow carbon fiber — defined as tows containing 48,000 to 60,000 individual filaments — represents the cost-performance frontier of the carbon fiber industry. While aerospace-grade carbon fiber uses 3K-12K tows for optimal fiber alignment and surface finish, large-tow products targe
18 сент. 2026 г.Читать107-Meter Wind Blade Carbon Fiber Beam: Domestic Large-Tow Supply Chain for Offshore Turbines
From record-breaking blade length to the domestic supply chain that makes it possible.
17 сент. 2026 г.ЧитатьLarge-Tow Carbon Fiber Shortage 2028: Wind Energy Supply Chain Risk Analysis
Industry analysts project a significant shortage of large-tow carbon fiber by 2028 as wind turbine blade demand outpaces production capacity. This article examines the supply-demand dynamics, capacity expansion timelines, and risk mitigation strategies for wind energy manufacturers.
8 сент. 2026 г.ЧитатьPolyacrylonitrile Oxidation Process: Stabilization Kinetics and Temperature Control for Carbon Fiber Production
PAN oxidation (stabilization) is the most critical and time-consuming step in carbon fiber production, converting thermoplastic PAN precursor into thermoset oxidized PAN that can survive carbonization. This article examines oxidation kinetics, temperature profiling, and process optimization for high-quality carbon fiber.
31 авг. 2026 г.ЧитатьBio-Based Carbon Fiber Precursors: Lignin, PAN from Biomass, and ISCC Certification
The carbon fiber industry is exploring bio-based precursors to reduce dependence on petroleum-derived acrylonitrile. Lignin-based precursors from paper pulp waste and bio-acrylonitrile from sugarcane ethanol are the most advanced alternatives. This article reviews their technical readiness, mechanical properties, and ISCC PLUS sustainability certification pathways.
30 авг. 2026 г.ЧитатьCarbon Tow Spreading: Pneumatic and Vibratory Spreading for Thin-Ply Composites
Tow spreading converts standard 12K or 24K carbon fiber tow into wide, thin bands of 25–50 mm width, enabling thin-ply prepreg with areal weights of 40–60 g/m². This article examines pneumatic, mechanical, and vibratory spreading methods, their process windows, and the quality trade-offs in spread tow production.
30 авг. 2026 г.ЧитатьGansu Nata's 10,000 Tonne Carbon Fiber Project: Northwest China Fills the Large-Tow Supply Gap
China's carbon fiber industry has long been concentrated in the eastern and northeastern coastal provinces — Jiangsu, Jilin, and Shandong host the largest producers, including Zhongfu Shenying, Sinopec, and Jilin-based manufacturers. The northwest, despite its enormous wind resources an
29 авг. 2026 г.ЧитатьCarbon Fiber Price Rebalancing 2026: Toray's 10-20% Hike vs Chinese Large-Tow Oversupply
Carbon fiber prices are rebalancing along two diverging tracks in 2026. At the premium end, Toray announced in 2025 that it would raise prices on carbon fiber and intermediate products by 10-20% from January 2026, citing rising raw material, energy, and logistics costs. At the commodity
27 авг. 2026 г.ЧитатьWind Spar Cap Sourcing Strategies: Unbundled Procurement and Precursor Traceability Demands
For most of the wind industry's scaling decade, the carbon fiber spar cap was a component inside a blade contract: blade manufacturers bought the complete rotor blade, and the spar cap arrived as part of a package. That is changing. Original equipment manufacturers such as Goldwind and
23 авг. 2026 г.ЧитатьSinopec 48K Large-Tow Full Production: China's Largest Single-Line Capacity and the 60K Gap
In May 2026, Shanghai Petrochemical — the refining and petrochemical subsidiary of Sinopec — confirmed that its two 48K large-tow carbon fiber lines had reached full production. Each line operates at more than 3,000 tonnes of annual capacity, which makes them China's largest single-line
23 авг. 2026 г.ЧитатьSouth Korea Carbon Fiber Space and Defense: Kolon Towpreg, Hanbit Rockets and Localization
South Korea entered the carbon fiber race late and has since assembled one of the most complete domestic supply chains outside the traditional leaders. Hyosung Advanced Materials produces PAN-based carbon fiber under the Tansome brand; Kolon Industries supplies towpreg and aerospace-gra
19 авг. 2026 г.ЧитатьTowpreg vs Prepreg vs Wet Winding: Cost and Performance for Pressure Vessels and Rockets
For cylindrical pressure vessels, hydrogen storage tanks, and rocket motor cases, the material form of the carbon fiber is as important as the fiber itself. A 40-70 liter Type IV hydrogen tank carries 50-65 percent of its raw material cost in carbon fiber, so the choice between wet wind
19 авг. 2026 г.Читать60K Large-Tow Carbon Fiber: Processing Challenges, Resin Pickup and Winding Performance
Large-tow carbon fiber is the workhorse of the industrial composites economy. Where aerospace parts demand the precision of 3K and 12K tows, wind turbine blades, pressure vessels and construction profiles are increasingly specified in 48K and 60K formats that cut fiber cost per kilogram
18 авг. 2026 г.ЧитатьDry Fiber Scrap Recycling in AFP Production: Reclaiming Tow Waste and Process Yield Improvement
Automated fiber placement has become the workhorse process for large aerospace and industrial carbon fiber structures, from fuselage barrels to rocket motor cases. Yet AFP is not a zero-waste process. A machine placing 12.7-millimeter-wide tow at high speed produces trims, gaps, and rol
16 авг. 2026 г.ЧитатьManufacturing 100-Meter-Plus Wind Blades: The 107-Meter Fujian Blade and Large-Tow Spar Cap Scale-Up
When the first 100-meter wind turbine blade was certified less than a decade ago, it was a milestone that seemed difficult to repeat. By 2026, 100-meter-plus blades are the mainstream of offshore wind development. The clearest signal came in May 2026, when a 107-meter blade — reported a
13 авг. 2026 г.ЧитатьWind OEM Margin Pressure and Large-Tow Sourcing: Strategic Procurement for the 2028 Shortage
The wind industry's cost crisis and its carbon fiber supply outlook are colliding on the same timeline. Turbine OEMs entered 2026 with blade prices under pressure, commodity input costs high, and several major players reporting negative margin quarters, while the large-tow carbon fiber
12 авг. 2026 г.ЧитатьWet Spinning vs Dry-Jet Wet Spinning for T1100-Grade Carbon Fiber: Process Comparison and Production Feasibility
T1100-grade carbon fiber — defined by tensile strength in the 6,500-7,000 MPa range — has historically been produced almost exclusively by dry-jet wet spinning (DJWS). The process, in which the spinning dope exits the spinneret through an air gap before entering the coagulation bath, wa
11 авг. 2026 г.ЧитатьLarge-Tow Carbon Fiber Supply Outlook: Shortage Risk Beyond 2028 and Strategic Sourcing for Wind and Hydrogen Buyers
Large-tow carbon fiber — practical fiber sold as 48K, 50K, and 60K tows — is the workhorse of energy-transition structural applications. It is the specified reinforcement for large wind turbine spar caps and shear webs, the standard for high-pressure hydrogen storage vessels, and increa
9 авг. 2026 г.ЧитатьCarbon Fiber Towpreg and Slit Tape: Cost-Effective Precursors for AFP, Filament Winding, and Braiding
Automated composite manufacturing — automated fiber placement (AFP), filament winding, and braiding — runs on a narrow family of precursor materials. For decades the default was standard unidirectional prepreg slit into tape, or dry tow used with a separate resin injection step. Carbon
4 авг. 2026 г.ЧитатьCarbon Fiber Automotive Rear Floor Pan with Integrated Battery Tray: Structural Battery Integration
Explore the design and manufacturing of carbon fiber rear floor pans with integrated battery trays for electric vehicles. This structural battery integration approach reduces weight, increases rigidity, and improves crash safety while simplifying assembly.
29 июл. 2026 г.ЧитатьEnergy Cost in Carbon Fiber Production: PAN Carbonization, Oxidation, and Graphitization Optimization
An in-depth analysis of energy consumption in PAN-based carbon fiber manufacturing, breaking down thermal processing costs across oxidation, low-temperature carbonization (LTC), high-temperature carbonization (HTC), and optional graphitization. Includes real production data, optimisation strategies, and a comparative table of energy efficiency across global production lines.
24 июл. 2026 г.ЧитатьLow-Cost PAN Precursor Alternatives for Carbon Fiber: Lignin, Pitch, and Textile-Grade PAN Developments
A technical examination of emerging low-cost precursor alternatives for carbon fiber manufacturing — lignin-based precursors, pitch-derived fibers, and textile-grade PAN — comparing material properties, process economics, carbon yield, and commercial readiness for cost-sensitive industrial applications.
20 июл. 2026 г.ЧитатьContinuous Fiber 3D Printing: Paste Extrusion vs Filament Deposition for Carbon Fiber Parts
A technical comparison of paste extrusion and filament deposition (FDM/FFF) methods for continuous carbon fiber 3D printing, covering process fundamentals, mechanical properties, cost analysis, material systems, and application suitability for production-grade composite parts.
8 июл. 2026 г.ЧитатьCarbon Fiber Raw Material Pricing: PAN Precursor Costs and H2 2026 Outlook for Buyers
Understanding carbon fiber raw material pricing is critical for B2B buyers navigating volatile markets. This article analyzes PAN precursor cost drivers, carbon fiber pricing tiers by grade, regional supply dynamics, and the H2 2026 price outlook, with actionable procurement strategies for composite manufacturers.
5 июл. 2026 г.Читать